|
Cooler Tie Down Kit |
 Loose
coolers are dangerous! Not only can the cooler and
boat be damaged, but they can cause serious injuries
as well. The cooler tie down kit consists of
2 deckplates, 2 eyebolts and 2 turnbuckles. All
components are die cast, 316 stainless steel.
Simply screw the deckplates to the boat deck
on either side of the cooler. The turnbuckles
secure the cooler to the deck.
When the cooler is not needed, only the deckplates
remain, leaving nothing to trip over.
Works best with Igloo 54-94 Quart Coolers, with
Rubbermaid 105 and 178 Quart Coolers, and others.
Other coolers may require a Universal Adapter
(below) for an easier installation.
Price only $33.00
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here
|
 |
|
Bucket Tie Down Kit |
 The
most common boating and fishing accessory is a 5
gallon bucket. Buckets are universally used to keep
small baits, arrange fishing rigs, as a place to
throw beer cans and old ballyhoo rigs, etc. But,
how do you keep the bucket from flying around the
boat?
The Bucket Tie Down Kit solves this problem easily.
Just mount the deckplate wherever you want the
bucket to reside. Drill a 1/4" hole in the
bottom of the bucket. Place the bucket over the
deckplate and secure it with the eyebolt/rubber
washer. Not only will the bucket stay in place,
it will not leak!
And as usual, when the bucket is not needed,
there is nothing to trip over.
Fly fishermen take note! This is a great, inexpensive
way to use any bucket as a boat mounted stripping
basket! No more tangled lines catching on cleats,
etc.
Kit consists of 1 deckplate, 1 eyebolt, 1 stainless
washer and 1 rubber washer.
Price only $10.00
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here
|
|
|
Bait Well Tie Down
Kit |
 Loose
bait wells are dangerous! Not only can the bait
well and boat be damaged, but they can cause serious
personal injuries as well, not to mention the loss
of bait!
The bait well tie down kit consists of 2 deckplates,
2 eyebolts, 2 turnbuckles and 2 adapters. All
components are 316 stainless steel.
Simply screw the deckplates to the boat deck
on either side of the bait well. Screw the adapters
into the bait well. The turnbuckles secure the
bait well to the deck.
When the bait well is not needed, only the deckplates
remain, leaving nothing to trip over.
Works with all bait wells.
Price only $39.00
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here
|
|
|
Chair Tie Down Kit |
 Eliminate
scratched decks with the chair tie down kit.
The chair tie down kit consists of 2 deckplates,
2 eyebolts and 1 turnbuckle. All components are
die cast, 316 stainless steel.
Simply screw one deckplate to the chair bottom
and one to the boat deck. The turnbuckle secures
the chair to the deck.
When the chair is not needed, only the deckplate
remains, leaving nothing to trip over.
Works with Garelick, Wise, SeaFarer, and SeaFit
Chairs and others.
Price only $20.00
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here
|
|
|
Stripping Basket
Tie Down Kit |
| The
most common boating and fishing accessory is a 5
gallon bucket. Buckets are universally used to keep
small baits, arrange fishing rigs, as a place to
throw beer cans and old ballyhoo rigs, etc. But,
how do you keep the bucket from flying around the
boat?
The Bucket Tie Down Kit solves this problem easily.
Just mount the deckplate wherever you want the
bucket to reside. Drill a 1/4" hole in the
bottom of the bucket. Place the bucket over the
deckplate and secure it with the eyebolt/rubber
washer. Not only will the bucket stay in place,
it will not leak!
And as usual, when the bucket is not needed,
there is nothing to trip over.
Fly fishermen take note! This is a great, inexpensive
way to use any bucket as a boat mounted stripping
basket! No more tangled lines catching on cleats,
etc.
Kit consists of 1 deckplate, 1 eyebolt, 1 stainless
washer and 1 rubber washer.
Price only $10.00
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here
|
|
|
Universal Adapter |
  The
Universal Adapter is used to simplify the installation
of coolers with rope handles, bait wells, and
any other device that does not have a convenient
way to attach the turnbuckle.
The Universal Adapter is manufactured from electro-polished
stainless steel and will last a lifetime in the
marine environment. For coolers that do not have
an easy attachment point, simply unscrew 2 screws
that hold the handle in place, and slide the Universal
Adapter under the handle and replace the screws.
See below.
It is specifically made to adapt to the following:
SSI 200 and 300 Quart Cooler
Igloo 128 (White picture) and 162 Quart Marine
Coolers
Igloo and West Marine 150 Quart Cooler
Other coolers or live bait wells may require you
to screw or through bolt the adapter.
Price only $12.00 (Pair)
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here |
|
|
T-Bolt |
 The
T-Bolts are made of polished, 316 stainless steel
and will never rust, not even in a marine environment.
The T-Bolt was designed to accept a 1" wide
nylon strap for tying down various equipment in
a boat such as SCUBA tanks, batteries, water and
fuel tanks, etc.
The T-Bolt is approximately 1.5" high and
2.0" wide with a 1/4 x 20 thread.
The T-Bolt was designed to screw directly into
the KPS Deckplate.
Price only $2.50
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here
|
|
|
Deckplate |
 The
deckplates are made of die cast, polished, 316 stainless
steel and will never rust, not even in a marine
environment.
At only 3/16" high, 7/8" wide and 2"
long, they have a very low profile and leave nothing
to trip over.
The deckplate is drilled and countersunk for
2, #10 mounting screws or bolts (not included).
The center hole is threaded (1/4 x 20 thread)
to accept either the KPS Eye-bolt or T-Bolt.
Price only $5.00
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here |
|
|
Eyebolt |
 The
Eye-Bolts are made of polished, 316 stainless steel
and will never rust, not even in a marine environment.
The Eye-Bolt is approximately 1.5" high
and 1.0" wide with a 1/4 x 20 thread.
The Eye-Bolt was designed to screw directly into
the KPS Deckplate.
Price only $2.50
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here |
|
|
Turnbuckle |
 The
Turnbuckle is made of die cast, polished, 316 stainless
steel and will never rust, not even in a marine
environment.
The Turnbuckle was especially designed to secure
a wide range of coolers and chairs to a boat deck.
The Turnbuckle has a wide adjustment range of
8" to 13 " in length with 1/4 x 20 threads
and hooks at both ends.
The Turnbuckle was designed to easily hook into
Igloo and Rubbermaid coolers, the Universal Adapter,
and into the KPS Eye-Bolt.
Price only $14.50
To place an order by phone, call 954-941-6124.
To place a secure internet order, click
here |
|
Lifetime Guarantee
All of our products are made to last and are guaranteed
for the life of the product. If any of our products
fail, for any reason, simply contact us, describe
the problem, and we will replace the defective part.
Your only cost will be one way shipping. |
|
